Laboratory Caleva Multi Lab

 CALEVA MULTI LAB  

GRANULATOR-- EXTRUDER-- SPHERONIZER

The Units Base unit     

 - Granulator system

 - Extruder system

 - Spheronizer system

General

The base unit and at least one attachment must be chosen.

Generally all three attachments are purchased at the same time.

Product Contact 316 stainless steel

FDA food approved plastics

Batch Size A wet batch of about 50 g is normal

Timer Automatic timer included

Power requirement 230V, 50Hz, 6.3A or 110V, 50Hz, 10A. 1 ph.

The Base Unit

Size:Approximately 480w x 375h x 375d mm

Weight : 34.2 kg (220V) or 36.4 kg (110V)

Cabinet :Brushed type 304 Stainless Steel

The Granulator Attachment  

Standard bowl Inter-meshing counter rotating blades for the highest possible shear

Half bowl A smaller “half-bowl” is available for

scarce or expensive product

High viscosity bowl Non inter-meshing “z” blade option for materials of higher viscosity

Water Jacket Bowls with or without water jacket

Extruder Attachment  

Standard die plates 1 mm diameter and 1mm depth holes

Diameter Options From 0.5 to 3.0 mm diameter holes

Depth Options Variable. Contact us for your needs

Screw speed 15 to 235 rpm

Product output Extrudate density can be modified using

additional dies

Spheronizer attachment

Processing Capacity 10 to 80 g wet weight

Speed Range 300 to 4,600 RPM

Contact us:

Tel: +86-10-66155031/32/33  Fax: +86-10-66155035

E-mai:office@goodwill-tech.com